ICOM IC-7000 HF/VHF/UHF All band radio.
Eham.net review: http://www.eham.net/reviews/detail/5338
KK5DR Review: http://www.kk5dr.com/reviews/7K.pdf
Youtube: http://uk.youtube.com/results?search_query=ic-7000&search_type=&aq=f
I bought one of these for a fixed installation at my QTH and this is one great little rig. It have a marvelous receiver and put out 100 watts with no problem. One drawback is the high current draw on receive and that is bad when you are portable on batteries. The thing I love about this radio is the IF DSP that is amazing. The Icom ic-7000 are in another league than the old icom ic-706. See under for specifications from Icom America. (http://www.icomamerica.com/en/products/amateur/hf/7000/default.aspx )
Specifications
| General | ||||
|---|---|---|---|---|
| Frequency Coverage*1 Receive Transmit |
0.030–199.999MHz*2 400.000–470.000MHz*2 1.800– 1.999MHz 3.500– 3.999MHz 5.3305, 5.3465, 5.3665, 5.3715, 5.4035MHz*3 7.000– 7.300MHz 10.100–10.150MHz 14.000–14.350MHz 18.068–18.168MHz 21.000–21.450MHz 24.890–24.990MHz 28.000–29.700MHz 50.000–54.000MHz 144.000–148.000MHz 430.000–450.000MHz *1 Showing USA Version. Varies according to version. *2 Some frequency bands are not guaranteed. *3 USB only. |
|||
| Mode | USB, LSB, CW, RTTY, AM, FM, WFM (Rx only) | |||
| No. of memory channels | 503 (495 regular, 6 scan edges and 2 call) | |||
| Antenna connector | SO-239×2
(for HF/50 MHz and 144/43/440MHz bands; 50Ω) |
|||
| Temperature Range | -10°C to +60°C;
+14°F to +140°F |
|||
| Frequency stability | Less than ±0.5 ppm (+0°C to +50°C; +32°F to +122°F) | |||
| Power supply requirement | 13.8V DC ±15% | |||
| Power consumption (approx.) |
|
|||
| Dimensions (W×H×D) (projections not included) |
167(W)×58(H)×180(D) mm; 69/1(6(W)×29/32(H)×73/32(D) in. |
|||
| Weight (approx.) | 2.3kg; 5.1lb | |||
| Receiver | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Intermediate frequencies SSB, CW, RTTY, AM, FM WFM |
124.487MHz, 455kHz, 16.15kHz 134.732MHz, 10.70MHz |
|||||||||||||||||||||||||
| Sensitivity (Pre-amp: ON) |
SSB/CW, AM : 10dB S/N, FM, WFM : 12dB SINAD |
|||||||||||||||||||||||||
| Squelch sensitivity SSB FM |
(Pre-amp: ON, threshold) Less than 5.6µV Less than 0.3µV |
|||||||||||||||||||||||||
| Selectivity SSB (BW: 2.4kHz, sharp) CW (BW: 500Hz, sharp) RTTY (BW: 350Hz) AM (BW: 6kHz) FM (BW: 15kHz) |
(representative value) More than 2.4kHz/–6dB Less than 3.9kHz/–60dB More than 500Hz/–6dB Less than 900Hz/–60dB More than 360Hz/–6dB Less than 650Hz/–60dB More than 6.0kHz/–6dB Less than 15kHz/–60dB More than 12kHz/–6dB Less than 20kHz/–60dB |
|||||||||||||||||||||||||
| Spurious and image rejection ratio |
More than 70dB (HF bands) More than 65dB (other bands) (except 1/2 IF through on 50MHz, IF through on 144MHz) |
|||||||||||||||||||||||||
| AF output power (at 13.8V DC) |
More than 2.0W at 10% distortion with an 8Ω load | |||||||||||||||||||||||||
| EXT SP connector | 2-conductor 3.5 (d) mm (1/8″) / 8Ω | |||||||||||||||||||||||||
All stated specifications are subject to change without notice or obligation.
READ ALL INSTRUCTIONS carefully and completely before using the transceiver.
Supplied Accessories
- Hand microphone, HM-151
- DC power cable
- Spare fuses
- ACC cable (13-pin)
- Electronic keyer plug
- RTTY key plug
- Microphone hange
